top of page

Make Your Order

Burkert

The device Type 8026 is specially designed for measuring the flow rate in solid-free liquids in a variety of applications (water treatment, waste water monitoring, chemical processing, etc.). The Bürkert-designed fitting system ensures simple installation of the device into all pipes from DN 20…DN 400.


The device is provided either with 2 configurable outputs (1 transistor output (NPN) and (1 current output 4…20 mA, 2-wire), or with 3 configurable outputs (2 transistor outputs (NPN/PNP) and 1 current output 4…20 mA, 2-wire) or with 4 configurable outputs (2 transistor outputs (NPN/PNP) and (2 current outputs 4…20 mA, 3-wire).


The device converts the measured signal, displays different values in different units (if the display/configuration module is mounted) and computes the output signals which are provided via one or two M12 fixed connectors. Thanks to 1 or 2 transistor outputs, the flowmeter can be used to switch a solenoid valve, activate an alarm and, thanks to 1 or 2 current outputs, establish one or two control loops.


Highlights


• Up to PN 10, size of measurement pipes: DN 20…DN 400

• Configurable outputs: one or two transistor output(s) and one or two

4…20 mA current output(s)

• Removable backlit display/configuration module for indication of flow

rate and volume with two flow totalizers

• Automatic calibration using teach-in, all outputs can be checked

without the need for actual flow



Burkert

Burkert Insertion flowmeter with paddle wheel - Type 8026

• Up to PN 10, size of measurement pipes: DN 20…DN 400
• Configurable outputs: one or two transistor output(s) and one or two
4…20 mA current output(s)
• Removable backlit display/configuration module for indication of flow
rate and volume with two flow totalizers
• Automatic calibration using teach-in, all outputs can be checked
without the need for actual flow

bottom of page